Precision levelling for iPhone & iPad
Stop guessing.
Start adjusting.
Your level tells you it’s wrong. BaseMate tells you which corner to move—and approximately how much.
↖ TRY THE MODES
THE DIFFERENCE
A bubble shows the problem.
Four numbers show the fix.
BaseMate combines your device’s motion sensors with the width and depth of the surface to estimate the adjustment at each corner.
Not a replacement for your spirit level. The practical next step after it.“Raise these corners by this much.”
THREE WAYS TO LEVEL
Match the calculation
to the job.
Every result maps directly to the physical corner in the same position.
Bring the low corners up.
Keep the highest corner at zero. Add shims, packers, supporting material or adjust feet at the others.
Bring the high corners down.
Keep the lowest corner at zero. See approximately how far the others need lowering.
Keep one corner fixed.
Select the corner that cannot move. Positive values raise; negative values lower.
BUILT LIKE A TOOL
Nothing between
you and the reading.
Large measurements. Immediate colour guidance. Controls that describe the job in plain language.
RedLow · raise
BlueHigh · lower
GreenWithin tolerance
FROM READING TO RESULT
Six steps. One
level surface.
Calibrate carefully, enter the surface size, then let BaseMate turn tilt into practical adjustments.
- 01CALIBRATE
Use a known level reference.
- 02MEASURE
Enter width and depth.
- 03POSITION
Place the device centrally near the edge.
- 04CHOOSE
Select Raise, Lower or reference.
- 05ADJUST
Follow each corner value.
- 06VERIFY
Recheck after adjustment.
AT HOME · IN THE GARDEN · IN THE WORKSHOP
Made for things
that need to sit right.
For rectangular bases, platforms and work surfaces—from a cabinet to a garden structure.
A practical levelling companion
Stop guessing how much.
Know which corner to move—and approximately how much.